If you need a replacement owner's manual for a Toyota car or light truck, it's extremely easy to get a. Maytag is a brand operated under the Whirlpool Corporation. The brand features many home and commercial appliances.
For proper maintenance and usage, it's important to be able to have a Maytag user manual handy. Here's how to find yours. Often filled with jargon, acronyms, and directions that require a Ph. D to understand, software user manuals are sometimes written from the point of view of a developer rather than a user. The recording will continue. To use the unit, turn it on again. This economy feature can also be set to [OFF]. This may cause a repair message to appear when powered up again.
VBR recording automatically varies the bit rate amount of data in a fixed time depending on the subject being recorded. This means if a recording with a lot movements is recorded, the recording time is reduced. The unit automatically focuses on the subject at the centre of screen when auto focus is selected. We recommend decreasing the zoom magnification and approaching the subject when recording. Number of pixels Select the menu. The sides of pictures recorded in a aspect ratio may be cut when printed.
Check before printing. Digital zoom function If the zoom magnification exceeds 70k , then the digital zoom function will be activated. The maximum magnification provided by the digital zoom can be switched.
Select the menu. When returning the zoom lever to the original position, move it quietly. The status indicator A flashes green and the unit goes into quick start standby mode.
However the image recorded is the same as a normal recording. The status indicator A lights red and the unit is put into recording pause approx. When the colour night view function is used, however, the white balance of the scene last recorded is retained.
To cancel the optical image stabilizer function Press the O. Press the joystick, and icons will be displayed on the screen. Function Backlight compensation Fade Effect This makes the image brighter to prevent darkening of a backlit subject. Select the desired icon with the joystick to display an explanation on the screen. Colour night view This allows you to record colour subjects in dark locations to stand out against the background. This is more effective if you record a person closely from the torso up.
Face detection When a subject is backlit and appears darker, this function detects the face and automatically adjusts the brightness and picture quality so that the face is recorded clearly. In the face detection mode, detected faces appear with frames. Larger faces and faces nearer to the centre of the screen take preference over others. Use this function to include yourself in the picture. The self-timer setting is cancelled. For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction.
In this case, cancel soft skin mode or zoom in on the face. Therefore, the date indication when displaying thumbnails or during playback may be different from the date when the recording actually started. If this occurs, turn off this function. Wind noise reduction function This reduces the winding noise picked up by the microphone.
Only when the mode dial is set to. You can check if the image is level while recording by using the guidelines displayed on the screen. Auto slow shutter mode You can record bright pictures even in dark places by slowing the shutter speed. If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored. The [ ] display flashes. If so, change the scene mode setting to [OFF].
Manual focus adjustment If auto focusing is difficult due to the conditions, then use manual focus. If so, you can adjust the white balance manually. MNL ] with the joystick. To restore to the automatic adjustment Set the white balance mode to [ AWB ].
In this case, use the automatic white balance. Please turn the unit on after opening the lens cover. Whenever recording conditions change, re-set the white balance for correct adjustment.
Aperture: Adjust it when the screen is too bright or too dark. To restore to automatic adjustment Press the iA button. The selected scene is played back, and the operation icon is automatically displayed on the screen. The thumbnails will disappear, but the scene or page numbers will change. Release the joystick when you have arrived at the page with the scene you want to display.
To change the playback speed Move and hold the joystick left or right. To adjust the speaker volume during playback Move the volume lever. If playback of a motion picture is stopped, [R] appears on the thumbnail view of the stopped scene. Plays back the previous picture. Plays back the next picture. Stops the playback and shows the thumbnails. Not all JPEG formatted files will be played back.
Proceed to step 5. When the confirmation message appears Select [YES], then press the joystick. Copied icon is indicated in the thumbnail display after copying. The deletion will stop. In this case, the image will not be deleted. However, please be aware that if an SD card is formatted, then all the data on the SD card will be erased. Operating method 1 2 Select the menu. DPOF Digital Print Order Format is a format which allows the user of a digital camera to define which captured images on the SD card are to be printed, together with information on the number of copies they wish to print.
Please note: Not all commercial printing services support this feature at this time. Select the number of prints, then press the joystick. Please perform the DPOF settings on this unit.
Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a PC, etc. The formatting will stop. Refer to the operating instructions of the TV for details about TV compatibility. For more information, please read the operating instructions for the TV. Refer to the operating instructions of the TV for details. The information displayed on the screen operation icon and time code etc.
For more information, please read the operating instructions of your TV. The disc that was copied to can be played back by connecting this unit and a DVD burner. Operation cannot be guaranteed with cables other than the one supplied with the DVD burner.
The data recorded on the disc will be erased. Please be aware that the erased data cannot be restored. It is possible to write only scenes that are added after copying or delete the copied scenes as a group.
After confirming that the data can be erased, select [YES]. If all scenes are copied, it is possible to create another set with the same contents. Follow the instructions on the screen. Select scenes so that they fit on to one disc. It is possible to create another disc with the same contents. It is possible to create another set with the same contents. Also, do not shake this unit and the DVD burner. This date may not be displayed properly depending on the software used. Do not format the disc because all data will be erased and cannot be recovered.
Refer to the operating instructions of the DVD recorder for details. Also, it takes time to automatically verify the copied data. For this reason, it may take longer to copy than the recording time on the SD card.
Wait until the message is displayed indicating completion of copying. For disc compatibility, refer to the operating instructions of the player. The DVD burner is capable of recording a maximum of still pictures on a single disc. Since the maximum number of still pictures that can be played back may vary with the player, some of the still pictures on the disc may not play back.
If the device is not capable of playing the disc, connect the DVD burner to this unit for playback. Then start recording on the connected device.
Then stop playback on this unit. If you dub images and then play them back on a wide-screen TV, they may be squeezed horizontally. In this case, refer to the operating instructions of the device you are dubbing to or read the operating instructions of the widescreen TV and set the aspect setting to Full.
Read the operating instructions for the printer. Operation is not guaranteed with any other USB cables. Select the desired number of prints, then press the joystick.
The USB function selection screen will appear. The [ screen. When you want to stop printing halfway Move the joystick down. A confirmation message appears. If [YES] is selected, the number of prints set is cancelled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3. These operations disable proper printing. Check before printing print preview. When using a printer with a trimming or borderless printing function, cancel this function before printing.
Refer to the operating instructions of the printer for details. Do not use a USB hub. C Edit images copied to a PC. Create playlists. D Play back images recorded by this unit on a PC. Necessary software DirectX If you are unsure whether or not your PC is compatible, contact the maker of your PC. If using Windows Vista, administrative account and standard account users only can use this software. An administrative account user should install and uninstall this software.
Article 2 Use by a Third Party Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, copy or modify the Software, except as expressly provided for in this Agreement. Article 3 Restrictions on Copying the Software Licensee may make a single copy of the Software in whole or a part solely for back-up purpose.
Article 4 Computer Licensee may use the Software only on one computer, and may not use it on more than one computer. Article 5 Reverse Engineering, Decompiling or Disassembly Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either of them is permitted under law or regulation of the country where Licensee resides. Further, Panasonic does not warrant that the operation of the Software will be uninterrupted or error free. Article 7 Export Control Licensee agrees not to export or re-export to any country the Software in any form without the appropriate export licenses under regulations of the country where Licensee resides, if necessary.
Article 8 Termination of License The right granted to Licensee hereunder will be automatically terminated if Licensee contravenes any of the terms and conditions of this Agreement. If you do not have authorization to do this, consult your manager. Click [Next]. The PC must be rebooted for the application to work. If so, click [Yes], and install it. If you install the software on a PC that is not compatible with DirectX 9. If you are unsure whether or not your PC is compatible, contact the PC manufacturer.
Follow the steps below to uninstall the software if it is no longer required. Select [VideoCam Suite 2. This unit is automatically detected by the PC. Disconnect the USB cable before turning this unit off. Doing so may damage the data on the SD card. The PC cannot write data to the unit, or erase data from the unit. Drag and drop the files onto the destination folder on the PC hard disk.
JPG etc. Doing so may make the SD card unusable in this unit. To disconnect USB cable safely 1 Double click the task tray. Click [Close], and you can safely disconnect the cable. If you log on with a user name for a guest user account, the software cannot be used. If you log on with a login name other than Administrator, the software cannot be used. Refer to the operating instructions of the software PDF file for details on how to use it.
You need to record the motion picture to upload in web mode. Before turning this unit off, disconnect the USB cable l The available services and the displays are subject to change without notice.
This card is not compatible or it cannot be recognised by the unit. Back up the data on the SD card to a PC, etc.
An irregularity in the unit has been detected. Restart the unit by turning off and on the power. The unit cannot correctly establish the connection to the PC or printer. The inserted disc contains recorded data. Confirm the contents by using the device that recorded the data before deletion. To copy the scene again, delete the displayed scene first. If faulty management information is found when an SD card is accessed, the following message may appear.
Be sure to follow the messages. Repairing may take time depending on the error. Even if the power is turned off without repairing the data, you can repair the data when you turn the power on again. This may cause the loss of data or the card. The table below shows examples of functions restricted by various conditions. This unit does not stay on long enough. Battery runs down quickly. In cold places, the battery using time becomes shorter. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced.
This unit is turned off automatically. To resume recording, turn the power back on. The power will not turn off automatically when the economy function l 21 is set to [OFF]. This unit cannot be operated though it is turned on. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor.
Then about 1 minute later, turn on the power again. Conducting the above operation while the SD card is being accessed may damage the data on the SD card. This unit does not operate normally.
The screen has changed suddenly.
0コメント