Fisher and Paykel has been around since and makes everything from ovens to refrigerators. At the end of these paragraphs, you can see the full list Fisher and Paykel service manuals we stock, which are available as a PDF download or hard copy. Almost all of them are immediate pdf downloads and ready for you to download after ordering.
What is included in each Fisher and Paykel service manual download? The information detailed in this manual is subject to change without notice, the latest version is indicated by the reprint date and replaces any earlier editions. The front cover picture shows the type of product and may not necessarily be an exact image of the models covered by the manual. The components shown in italics with a part numbe r are those parts in the kit which are available also as separate items.
In addition, some parts may be supplied with this kit which are not available as separate items and are therefore either not listed or a part number is not shown against the part description in this manual. All details relating to Technical Bulletins or Notes are shown on a dedicated page. Action: Replace Display Module. Page 38 A This suggests that the motor current sense circuit is faulty. Primary source: Motor Control Module. Page 39 A 2 Check that the clutch teeth are not locked together with dirt, lint, etc.
Page 40 A Action: Replace the Thermistor temperature sensor. Secondary Source: Motor Control Module has failed to read the temperature. Check connections. Action: Replace Motor Control Module if connections look fine and the fault still occurs.
These procedures are set out below. Servicing note a To avoid stripping screws, do not overtighten when re-assembling parts. If using a power screwdriver, have the torque setting on low.
Refer to Section 9. Reassembly: Refit in reverse manner. Note: If the inner basket is tight on the shaft pressure may need to be placed on the top of the shaft, while at the same time jiggling the inner basket upwards. Refer to Section. Page Removal Of Stator A 9.
Page Removal Of Pump A 9. If leaning the machine against a wall ensure that the machine is stable, and take necessary precautions not to damage the wall or the machine. If however there are concerns over the condition of the water and there may be a risk of infection, ie from hepatitis etc, then bail the water from the machine first.
The contents of the kit are as follows: Bearing Removal Tool Kit Note: The extractor mandrel was designed for the older shaft with the external thread, however will work with the shaft on this machine with the internal thread. If in doubt, replace. Page 53 A c Ease the shaft through the bearings from inside the outer basket. Take care the shaft is fitted with the threaded retaining nut section facing downwards in the direction of the base. Use the spline tool and spanner to tighten the shaft retention nut.
Permanent Press or Delicate cycles have been designed to minimise creasing as they use a lower spin speed. Do not leave wet clothes to sit in the washer or laundry basket.
Check the spline drive is clean. If there is a grating sound, check the single stainless steel washer beneath the spline drive. Page 57 A Notes This manual is also suitable for: Ecosmart gwl Print page 1 Print document 57 pages.
Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR.
0コメント